Farzad Rafieian
Assistant Professor

School of Mechanical Engineering
Arak University of Technology, Arak, IRAN

  E-mail:  این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید, این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید
Tel:  +98 (86) 33400673

 Academic Degrees

Ph.D., Mechanical Engineering, École de technologie supérieure (ÉTS), Montréal, Canada
Thesis: Chatter Vibrations in a Robotic Grinding Process

M.Sc., Aerospace Engineering, Iran University of Science and Technology, Teheran, Iran
Thesis: Vibratory Dynamics of Gear Pairs with Backlash

B.Sc., Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

Selected Professional Experiences

Assistant Editor

Journal of Theoretical and Applied Vibration and Acoustics (TAVA)

Iranian Society of Acoustics and Vibration (ISAV)

Feb. 2015 –

Research Officer

Oil Turbo Compressor Group (OTC), Tehran, Iran

Feb. 2015 –Sep. 2017

Research Associate

École de technologie supérieure (ÉTS), Montréal, QC, Canada

Mar. 2014 – Oct. 2014

Research Assistant

Hydro-Québec’s research institute (IREQ), Varennes, QC, Canada

Sep. 2007 – Oct. 2014

Publications

Journal papers:

F. Rafieian, H. Jalali, 2019, “Attenuating vibration transmission from a Town Board Station (TBS) to the neighbor residential building using an optimum isolator: A case study”, Journal of Theoretical and Applied Vibration and Acoustics, 5 (1), 43-54.

F. Rafieian, B. Hazel Z. Liu, 2014,  Vibro-impact dynamics of material removal in a robotic grinding process, Int. J. Adv. Manuf. Technol., 72 (104), 1-24.

F. Rafieian, F. Girardin, Z. Liu, M. Thomas, B. Hazel, 2014, Angular analysis of the cyclic impacting oscillations in a robotic grinding process, Mech. Syst. Signal Process., 44, 160-176.

M. Tahvilian, B. Hazel, F. Rafieian, Z. Liu, and H. Champliaud. 2015, Force model for impact-cutting grinding with a flexible robotic tool holder, Int. J. Adv. Manuf. Technol, 1-15.

Conference papers:

M. Ranjbar, F. Rafieian, H. Jalali, A. Zakipour, 2019, “Initiating a test-rig for the measurement of instantaneous angular speed (torsional vibrations)”, 9^th International Conference on Acoustics and Vibration (ISAV), December 24-25, Iran University of Science and Technology, Tehran, IRAN.

H. Moomen, F. Rafieian, H. Jalali, P. Mohammadi, 2019, “Equivalent modeling in rotor-dynamics:  The case study of a blower shaft”, 9^th International Conference on Acoustics and Vibration (ISAV), December 24-25, Iran University of Science and Technology, Tehran, IRAN.

H. Jalali, F. Rafieian, M. Rajaei, 2019, “Experimental modal testing on the rotor armature of an exciter in Shazand power plant: a case study”, 9^th International Conference on Acoustics and Vibration (ISAV), December 24-25, Iran University of Science and Technology, Tehran, IRAN.

H. Jalali, F. Rafieian, 2018, “Dynamic modeling of cutting tool vibrations and experimental identification of modal parameters”, 8^th International Conference on Acoustics and Vibration (ISAV), December 4-5, Shahid Beheshti University, Tehran, IRAN.

F. Rafieian, B. Hazel, Z. Liu, 2014, Regenerative instability of impact-cutting material removal in the grinding process performed by a flexible robot arm, 6^th CIRP Conf. on High Performance Cutting (HPC), June 23-25, University of California, Berkeley, USA.

F. Girardin, F. Rafieian, Z. Liu, M. Thomas, B. Hazel. 2011, Using angular speed measurement with hall effect sensors to observe grinding operation with flexible robot, The Int. Conf. Surveillance 6, October 25-26, Compiègne, France.

F. Mokdad, V. H. Vu, M. Thomas, F. Rafieian, Z. Liu, B. Hazel, 2011, Online modal analysis of a flexible robot during grinding, Int. Operational Modal Analysis Conf. (IOMAC), May 9-11, Istanbul, Turkey.

B. Hazel, F. Rafieian, Z. Liu, 2011, Impact cutting and regenerative chatter in robotic grinding, ASME Int. Mech. Eng. Cong. and Exposition (IMECE), November 11-17, Denver, USA.

F. Rafieian, Z. Liu, B. Hazel, 2009, Dynamic model and modal testing for vibration analysis of robotic grinding process with a 6-DOF flexible-joint manipulator, IEEE Int. Conf. on Mechatronics and Automation (ICMA), August 9-12, Changchun, China.

F. Rafieian, H. Ahmadian, 2007, Gears’ model-based diagnosis through sideband structures in vibration spectrum, The 20^th Int. Cong. and Exhib. on Condition Monitoring and Diagnostic Engineering Management (COMADEM), June 13-15, Faro, Portugal.

F. Rafieian, H. Ahmadian, 2007, Backlash effect on sideband structures of gear pairs’ vibration spectrum, 15^th Ann. Int. Conf. on Mechanical Engineering (ISME), May 15-17, Tehran, Iran.

F. Rafieian, H. Ahmadian, 2007, Modeling backlash in gear pairs and identification of its parameters, 1^st Condition Monitoring and Fault Diagnosis Seminar (CMFD), Feburary 26-27, Tehran, Iran (Persian).

M. Ashrafizaadeh, F. Rafieian, 2007, A review of integrity assessment methods for gas transmission pipelines, Iranian Corrosion Int. Cong. (ICIC), May 14-15, Tehran, Iran.

F. Rafieian, H. Ahmadian, 2006, Modeling energy dissipations in gear pairs with backlash, 24^th Canadian Machinery Vibration Association (CMVA) Ann. Seminar on Machinery Vibration, October 25-27, Montréal, Canada.

Courses Taught

Advanced Vibrations (graduate)

Machining Dynamics (graduate)

Fundamentals of Rotating Machinery Diagnostics (graduate)

Mechanical Vibrations (undergraduate)

Robotics (undergraduate)

Dynamics (undergraduate)

Technical Language (undergraduate)

 برنامۀ هفتگی